High Clearance Forward A-Arms – 2013-20 Full Size Polaris Ranger w| Pro-Fit Cage

NOTES:
– Comes in black powder coating ONLY.
– Will NOT fit 2018 Polaris Ranger XP 1000 and Ranger Crew XP 1000 High Lifter Editions.
Applicability: Fits Full Size w/ Pro-Fit Cage

2013-15 Ranger XP 900 and 900 Crew

2015-19 Ranger Diesel and Crew Diesel

2015 Ranger Full Size 570 and 570 Crew

2016 Ranger XP 900 / Crew XP 900-5 / Crew XP 900-6

2016 Ranger XP 570 and Crew XP 570-6

2017-19 Ranger XP 900 and Crew XP 900

2017 Ranger XP 1000 and Crew XP 1000

2018-20 Ranger XP 1000 and Crew XP 1000
We know that a side by side owners favorite upgrade to make on their UTV is larger tires, but what happens when there’s not enough clearance for the tire size you wantWhile a lift kit might help you some, forward a-arms can give you even more room for that massive tire size you’ve been eying. Check out the High Clearance Forward A-Arms for your Polaris Ranger XP 900 or Polaris Full Size Ranger 570.
These forward a-arms have so many great features that you’re sure to be impressed, starting with a lifetime warranty. That’s right! If you bend them, break them or they fail you for any reason, even at your own fault, will replace them! With 1.25 inch tubing, these a-arms are incredibly strong and with the unique dual bend design, these are designed to maintain the factory steering geometry. This means there’s no added wear or tear on your important components, including axles and tie rods.
With the 1.5 inch forward offset, you get an additional 1.5 inches of clearance so you should be able to run larger tires without even adding a lift. These high clearance a-arms also feature the industry leading adjustable upper ball joint, allowing for full chamber adjustability so you can customize your ride to your individual needs. Also included is a steering stop kit to help prevent over-steering that can create unneeded bind on your axles.
Features:
Adjustable pivot blocks
1.25″ tube – 25% larger than OEM
1.5″ forward offset
Full camber adjustability
Reuses factory upper and lower ball joints
Durable black powder coating
Optional 2018 Ranger Crew XP 1000 Track Bars:
If you are looking to bump up the durability of your machine, these track bars are a no-brainer. Crafted from heavy duty 1.25″ diameter steel and a mounting plate made of 1/8″ steel, these Track Bars will virtually double the strength of your front suspension. Take your 2018 Ranger XP 1000 through rougher terrain without fear of damaging your a-arms or giving up any strength or clearance. Purchase yours today and hit the trails!
Virtualy doubles the strength of your front suspension
Designed for the Ranger XP 1000 High Clearance Forward A-Arms
Bars made of 1.25diameter steel
Mounting plate made of 1/8steel plating
Optional Racing A-Arm Bushings:
Are your a-arm bushings becoming worn down and need to be replacedRacing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!
Designed to be an OEM replacement bushing
Contains 52100 bearing steel that is hardened and precision ground
Double lip seals Type TC
Contains thrust shims and cup seal
Kit contains components to replace the front or both front and rear a-arm bushings
Optional Pivot Works A-Arm Bushings:
When you need replacement a-arm bushings, we have the solution for you! Pivot Works created the perfect OEM replacement bushing for your UTV model. Each piece is designed get your steering under control and restore the precision feel that your machine had when it was new. Purchase yours today to replace those worn down parts!
Designed to be an OEM replacement bushing
All kits come complete with the necessary hardware to do both the left and right sides
Restores precision feel of new machine
Optional Ball Joints:
Manufactured and designed by Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you’re looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!
View A-Arms Installation Instructions
View Track Bar Installation Instructions