12″ inch Slim Fan Push Pull Electric Radiator Cooling Fans 12V Mount Kit Unversal Black

Comes with mount brackets and tie straps kit
Maximum Fan CFM=1750 CFM, Maximum Fan RPM=2250 RPM
Size: 12 Inch, Thickness: 2.5 Inch
10 Blades, 12 Volts, 6.6 AMP DRAW, 80W
A customer said that the fan was not available. We put the instructions on the main picture for reference. Thank you. You can contact us if you have any questions.
Installation:
Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.
Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.
Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.
Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.
Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed.