- Wenling, Zhejiang, 317500, P.R.China
- parts@atvaftermarketparts.com
Product
Categories
- ATV A Arm (82)
- ATV A Arm Guard (86)
- ATV Accessories (387)
- ATV Air&Oil Filters (188)
- ATV Axles (109)
- ATV Ball Joint (83)
- ATV Battery Chargers (17)
- ATV Bearing Carrier (66)
- ATV Bearings (21)
- ATV Body (331)
- ATV Boot Kit (2)
- ATV Brakes (247)
- ATV Bushings (104)
- ATV Cable (19)
- ATV Carburetor (242)
- ATV Cargo Bag/Luggage (140)
- ATV Chain (69)
- ATV Communications/Mounts (2)
- ATV Covers (155)
- ATV Crank Shaft (137)
- ATV Drive Belt (141)
- ATV Drive Clutch (545)
- ATV Engine (50)
- ATV Exhaust (89)
- ATV Fan (99)
- ATV Fender (61)
- ATV Foot Controls (32)
- ATV Fuel Pump (64)
- ATV Fuel Tank (13)
- ATV Fuel Tanks (0)
- ATV Gasket (21)
- ATV Gear Box or Reverse Gear (18)
- ATV Graphics and Decals (1)
- ATV Handguard (29)
- ATV Handlebars (220)
- ATV Heaters (0)
- ATV Ignition Coil (48)
- ATV Lift Kit (203)
- ATV Lighting (140)
- ATV Mirrors (81)
- ATV Mounting Kit (62)
- ATV Pulley (9)
- ATV Radiator (184)
- ATV Rectifier/Regulator (86)
- ATV Repair Kit (47)
- ATV Seat Belt (4)
- ATV Seats & Covers (174)
- ATV Sensor Assembly (116)
- ATV Solenoid (95)
- ATV Sparkplug (0)
- ATV Sprocket (7)
- ATV Starter (121)
- ATV Steering Rack and Pinion (21)
- ATV Steering Wheel (8)
- ATV Suspension (658)
- ATV Switch (101)
- ATV Tach/Hour Meter (21)
- ATV Throttle Control (26)
- ATV Tool Box (55)
- ATV Tools (234)
- ATV Wheels and Tires and Rim (117)
- ATV Winches & Mounts (107)
- ATV Windshields (17)
- ATV Wiring Harness (41)
- Uncategorized (0)
Product tags
A-Arm Guard
air filter
axle
ball joint
belt
bracket
brake pads
brake shoe
bushing
bushing block
carburetor
car lamp
car light
centrifugal clutch
clutch
clutch parts
clutch shoe
cooling fan
cooling radiator
drive belt
fan
front fork
hand-bar
handle
handle bar
heat sink
holder
Lamps
lift kit
Lift Kit, bracket, lowering kit, holder
Lights
liner bushing
lining
lowering kit
seat
sensor
shaft
shock absorber
sleeve bushing
starter motor
switch
tire
tool
transducer
tyre
Description
Monstrous Winching Power: A 1.9 HP motor, a full metal 3-stage planetary gear system and a permanent magnet motor guarantee reliable pulling muscle against any harsh conditions and ensure faster line speed under load.
Intrepid From Inside: Equipped with a gear reduction ratio of 153:1 and a differential planetary gear train, this ATV/UTV winch is born with stronger pulling capacity.
Dual Remote Control: This wireless winch comes with the dual remote control mode, including 25 meters of wireless control, and features an upgraded synthetic rope that is more than 10 times durable than traditional ones.
Ultimate Protection: Rainproof construction, matte black textured finish and sealed engine guarantee resistance against rain and moisture and ensures trust-worthiness and long last functionality.
Warranty & Caution: This winch also enjoys a 1 Year Warranty and lifetime technical support. Besides, 2 longer cables should be connected to the battery, and the shorter one is required to be connected to the motor during installation.
Fieryred, which has been engaging in the R Length:15m(49.21ft)
– Dual Control Mode: Remote (25 meters; 82.02ft) and Wired (2.5 meters; 8.20ft)
– Drum Diameter/Length: 37mm(1.46in) x72mm(2.83in)
– Mounting bolt pattern: 130mm(5.1in)*76mm(2.99in)
– Dimensions: 316mm(12.44in)*120mm(4.72in)*106mm(4.17in)
-Recommended Battery: 23A 12V
-Rope: synthetic rope
-Control switch: Remote Switch/Wireless Control
-Full Load Line Speed (ft/min)2.6ft(0.8m)
-No-Load Line Speed (ft/min)10.8ft(3.3m)
-Max Current at Full Load (A):140(amps)
1
1
1
NOTE
The wireless control is not water-proof.
The synthetic rope should not be used in circumstances that are not included in the manual instruction.
It is not recommended to use the winch for purposes that are not listed in the manual instruction.
Before using, you should check your winch carefully. Any part that is damaged should be properly repaired or replaced.
Observe your winch while winching, while standing at a safe distance.
Do not attempt to exceed the pulling limits of this winch.
Winch clutch should be disengaged when not in use and fully engaged when in use.
Please do not use wireless controller if you’are going to operate 2 winches simultaneously, which is likely to result in signal interference.
Do not operate the winch at an angle of more than 15, because angles greater than this will deform or damage parts of the winch.
Related products
-
ATV Tools
Hub carrier 162 / Ambra / Nova
-
ATV Tools
hub carrier Mc1 / Mc2 / Virgo 3