High Clearance Forward A-Arms – RZR S 800

Applicability: 2009-14 Polaris RZR S 800 and RZR 4 800
The best part of owning your Polaris RZR S or RZR 4 800 is the ability to travel down rough trails and tackle tricky terrain. While your Polaris RZR can handle most of the challenges you throw at it, sometimes the terrain can get to be a bit much for your stock RZR. That’s why we offer Super ATV’s High Clearance Forward A-Arms for your side by side.
These high clearance a-arms have a forward offset of 1.5 inches, creating a longer wheel base and allowing for larger tires. The high clearance forward a-arms move the front hubs forward, not only lengthening your wheel base for increased stability, but for allowing larger tires without lifting or modifying the RZR. When moving your control arms forward, the toe on the steering rack needs to be adjusted and these a-arms make it easy to get back to factory specifications by including new extended tie rod ends that are engineered to work with factory axles.
The a-arms are made from 1-1/4 inch thick wall steel tubing, much thicker than the standard factory a-arms that are only 1 inch thick. A steering stop kit is included with these high clearance forward control arms. With these a-arms, you can confidently take your RZR S or RZR 4 800 down nearly any trail and over some of the roughest terrain that you can find.
Features:
High clearance with 1.5 inch forward offset
Extended tie rod ends included
Steering stop kit included
Manufactured from 1-1/4 inch thick wall steel tubing
Can be used with factory wheels and tires
1.25″ tube – 25% larger than OEM
Full camber adjustability
Does not include ball joints
Lifetime warranty on a-arms
Optional Racing A-Arm Bushings:
Are your a-arm bushings becoming worn down and need to be replacedRacing has come up with the perfect OEM replacement bushing for your machine. Each piece is designed to provide greater suspension travel and performance. Purchase yours today to replace just the front or both the front and rear and keep your machine in top notch!
Designed to be an OEM replacement bushing
Contains 52100 bearing steel that is hardened and precision ground
Double lip seals type TC
Contains thrust shims and cup seal
Kit contains components to replace the front or both front and rear a-arm bushings
Optional Pivot Works A-Arm Bushings:
When you need replacement a-arm bushings, we have the solution for you! Pivot Works created the perfect OEM replacement bushing for your UTV model. Each piece is designed get your steering under control and restore the precision feel that your machine had when it was new. Purchase yours today to replace those worn down parts!
Designed to be an OEM replacement bushing
All kits come complete with the necessary hardware to do both the left and right sides
Restores precision feel of new machine
Optional Ball Joints:
Manufactured and designed by Racing, this perfect OEM replacement ball joint is sure to impress. Their steel housing ensures toughness and durability. Each is made to be self lubricated to keep the joint from seizing. The POM-M90 bearing cup is designed to isolate the steel rod from the housing to prevent damage. If you’re looking for the perfect replacement for your worn out ball joints, grab a set for your upper and lower joints today!